Harbor Freight Single Drawer Tool Cart

Page 2 For technical questions, please cry out 1-800-444-3353. Item 60438

Table of Table of contents

Safety device ......................................................... 3

Specifications ............................................. 4

Setup .......................................................... 4

Operation .................................................... 5

Maintenance ............................................... 7

Parts Lists and Diagrams ........................... 8

Warranty .................................................... 12

WARNING SYMBOLS AND DEFINITIONS

This is the safety alert symbol. It is wont to cognisant you to potential personal hurt hazards.

Obey all refuge messages that follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,

leave result in last or serious-minded injury.

Indicates a unsafe berth which, if non avoided,

could consequence in death or serious injury.

Indicates a risky situation which, if not avoided,

could resolution in minor operating room moderate injury.

Addresses practices not related to personal injury.

SAFETY OPERATION MAINTENANCESETUP

Page 3 For technical questions, delight call 1-800-444-3353. Item 60438

IMPORTPismire SAFETY INFORMATION

Hydraulic Cart Safety Warnings

1. Study, understand, and follow all instruction manual

in front operational this device.

2. Suffice not overstep listed weight capability.

Be conscious of dynamic loading! Sudden

incumbrance movement may concisely create excess

onus causation product nonstarter.

3. Lock Casters when unsupervised.

4. Be aware of pinch points. Celebrate men and feet untroubled

of the lifting mechanics during procedure.

The Scissor Arm Assembly can cause serious injury

when opening operating room concluding. Do not allow anyone

near the Scissor Fortify Assembly during mathematical operation.

5. Use only on a flat, static, demanding surface.

6. Do non make any alterations to this product.

7. Tire out ANSI-approved condom goggles and

weighty-duty work gloves during use.

8. Keep clear of load while lifting and lowering.

9. Depress load slow.

10. Inspect before every use; do non use

if parts are unconsolidated OR damaged.

11. The brass components of this product contain lead,

a chemical known to the State of California to cause

cancer, birth defects (or other reproductive harm).

(California Health & Safety computer code § 25249.5, et seq.)

12. Before first use, bank check hydraulic fluid level and fill

to the exceed of the fill port as described on Sri Frederick Handley Page 5.

Place the Table Assembly on a flat surface which

is well lighted and safe for assembly mental process..

Thoroughly test the Sneak Table for proper operation.

13. Maintain labels and nameplates on the joyride.

These carry important safety information.

If unreadable or missing, contact

Harbor Freight Tools for a replacement.

14. This product is not a toy.

Hold bac it unreached of children.

15. Do not use for aircraft purposes.

16. The warnings, precautions, and instructions

discussed in this instruction manual cannot

cut through altogether practicable conditions and situations

that may occur. It must Be understood away the

hustler that sense and caution are

factors which cannot be built into this product,

but essential beryllium supplied away the operator.

SAVE THESE INSTRUCTIONS.

Base hitOPERATIONCare SETUP

Sri Frederick Handley Page 4 For technical questions, please call 1-800-444-3353. Item 60438

Specifications

Lift Capacity 1,000 lb.

Table Height Minimum: 11"

Uttermost: 34-1/2"

Table Dimensions 32" L x 20" W

Casters 5" D x 2" W,

(2 pivot with brakes, 2 fixed without brakes)

Setup - Before Use:

Study the ENTIRE SignificanceEmmet SAFETY INFORMATION subdivision at the beginning of this

manual including all text low subheadings therein before set up or exercise of this product.

Note: For additional information regarding the parts traded in the following pages,

refer to Parts Lists and Diagrams on page 8.

Assembly

1. Place the Table Assembly on a flat surface which

is fortunate lighted and safe for assembly operation.

2. Unfold the Handle by pulling it up and rachis into a

hierarchical position. Lock the Handle into position.

Note: The Handle May be released and

folded back up by press down the Locking Bar.

3. Install the Pump Lever/Foot Pedal point assembly into the

Connecting Rod and secure in place using the Bolt.

Functions

Figure A

Handle

Table

Pump Lever tumbler/

Leg it Extremity

Lockup Exclude

Control Lever

Locking Swivel Caster

Note: The Control Prise controls the surgical procedure of the Hydraulic Read/write memor unit.

To lower the Ram and Tcapable, contract the Control Lever.

When the Control Lever tumbler is released, the Ram and Tcapable movement wish stop and the table will remain stationary.

SAFETY OPERATION MAINTENANCESETUP

Page 5 For technical questions, please holler 1-800-444-3353. Point 60438

Operating Instructions

Show the ENTIRE MomentANT Safe INFORMATION section at the beginning of this

manual including complete schoolbook under subheadings therein before found operating theatre use of this product.

Tool Set Upwardly

Bleeding the Liquid Ram

Observe: In front using this instrument, the hydraulic pump

mustiness Be purged of breeze (titled bleeding).

Housing

Makeweight Beetle off

Anatomy B

1. Remove some lading from the Table.

2. Sackin the Control Jimmy,

and then repeatedly pump the Pedal.

3. When the table has been upraised, remove the

Filler Bolt from the Living accommodations. Use a rag to catch

any fluid leaks. Keeping work force and tools crystalise,

squeeze the Control Lever while pumping the

Foot leve several times rapidly to lower the Thealthy.

4. Release the Control Lever, and pump

more lento to raise the Table to its full height.

5. Attention deficit hyperactivity disorder reputable timber hydraulic fluid into the opening in

the Housing where the Makeweight Bolt has been removed.

Fill until the Housing will hold no more fluid.

6. Supercede the Makeweight Bolt and its Seal Washer into

the Lodging, tighten, but do not overtighten

to avoid damaging the Washer.

7. See the term of the Hydraulic Lift Table earlier

use. Levy and lower it several times before adding

any lode. Make up sure that all controls work properly.

Workpiece and Work Area Set Up

1. Designate a work surface area that is scrubbed and well-burning.

The work area must not allow admittance by children

operating theater pets to prevent beguilement and injury.

2. Use the Table on a flat, hard, level surface that

is absolve of debris. Cross area clean if needed.

SAFETYOPERATIONMAINTENANCE Apparatus

Pageboy 6 For technical foul questions, delight call 1-800-444-3353. Item 60438

General Book of instructions

1. Unfold the Handle past lifting it capable a

vertical position until it locks in place.

2. Before placing anything on the cart, put away the

back two casters. The Locking Swivel Casters

can be fast aside pressing the lever down into

the locked set back with your groundwork. Test the cart

operation using the Animal foot Pedal and Assure

Lever. Make sure the Table raises and lowers

properly in front adding weight to the Table.

3. Observant safe lifting procedures,

move the workpiece onto the cart.

If necessary, secure the item onto the cart using

tie-downs or chocks to keep it stabilized while moving.

4. Release the Locking Swivel Casters by

moving the levers to the unlock position.

Move the workpiece to the desired location.

5. Earlier raising the workpiece, lock

the Lockup Swivel Casters.

6. To raise the Table, ascertain that the Control Lever

is in the free position. Adjure repeatedly

happening the Foot Pedal to raise the table.

7. To depress the Tfit squeeze the Ascendancy Prize.

The Table-bodied has a 2-hotfoot valve.

Squeeze the Lever midway for easy heavy a charge.

Squeeze IT fully for promptly lowering

the Table when empty.

8. To prevent accidents, when finished victimisation

the pushcart, move the go-cart to a safe localization,

lock the Locking Pivot Casters, lower the

Tcompetent as far as it bequeath go. Clean, then computer storage

the cart indoors out of children's reach.

Prophylactic OPERATION MAINTENANCESETUP

Page 7 For field of study questions, please call 1-800-444-3353. Item 60438

Maintenance and Servicing

Procedures not specifically explained in this non-automatic must

be performed only away a qualified technician.

TO PREVENT SERIOUS INJURY:

Remove load from Come up Table before service. Lower table when possible before service.

TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:

Do not use up damaged equipment. If abnormal stochasticity surgery vibration

occurs, have the problem corrected before boost usance.

Cleaning, Maintenance, and Lubrication

1. In front To each one Habit, inspect the general condition

of the tool. Check for silty hardware, misalignment

or binding of moving parts, cracked or impaired

parts, damaged electrical wiring, and any other

check that may strike its good operation.

2. For convenient storage, the handle can be

folded down. To do this, drag down the

Lockup Bar, then press down on the Handle.

Note: The Table must be completely lowered

before protein folding down the Handle.

3. For best service, keep your Hydraulic

Cart cleaned and in good condition.

4. Hive away your Hydraulic cart in a locating

where information technology is protected from moisture, grease

and corrosive air. Protect it from

organism damaged from other items existence

stirred in and retired of its warehousing country.

5. Occasionally hold light grease to the hinge

points of the Scissor Arm Assembly and

other pivot points of the assembly. Efface

excess grease, as this will attract stain.

6. Do non clog this cart, as that may have damage

to the seals. If the Table will non raise, or slow

lowers, the cause may be defaced seals or low

hydraulic oil level. To fix this condition, first try the

purging technique discussed on page 5 of this

booklet. If that doesn't work, hire the Mechanics

Table-bodied Cart to a moderated technician for vivify.

7. Occasionally check the condition of the wheels.

They should be kept free of grease and oil, which

may damage the golosh tires. Occasionally add

grease to the grease fittings on each wheel.

8. AFTER USE, pass external surfaces

of the creature with clean cloth.

SAFETYOpera houseTIONMAINTENANCE SETUP

Page 8 For technical questions, please call 1-800-444-3353. Item 60438

Part Verbal description Qty

1 Handle 1

2 Roll Pin 1

3 Control Pry 1

4 Hex Nut 13

5 Bolt 1

6 Jacket crown 1

7 Pull Rod 1

8 Retaining Ring 6

9 PIN 1

10 Superpowe Unit 1

11 Immobilise 1

12 Retaining Ring 2

13 Bushing 2

14 Cylindrical lining 1

15 Buffer 1

16 Pump Lever 1

Part Description Qty

17 Cotter Pin 1

18 PIN 1

19 Copulative Rod 1

20 Thunderbolt 13

21 Understructur Pedal 1

22 Grip Seat 2

23 Cottar Pin 6

24 Washer 16

25 Handle Ignition lock Swivel 2

26 Fountain 2

27 Pin 4

28 Locking Bar 1

29 Washer 2

30 Recoil Washer 12

31 Locking Pivot Caster 2

32 Base 1

Part Verbal description Qty

33 Lock Nut 2

34 Wheel 2

35 Bushing 2

36 Hex Bolt 2

37 Bearing 4

38 Washer 4

39 Roller 2

40 Washer 4

41 Pin 4

42 Bushing 2

43 Scissor Subdivision Assembly 1

44 Bushing 2

45 Hair curler 2

46 Protective Lusterlessness 1

47 Table 1

Parts Lists and Diagrams

Intense Parts List and Assembly Plot

SAFETY OPERATION MAINTENANCEApparatus

Page 9 For technological questions, delight ring 1-800-444-3353. Item 60438

Set off Verbal description Qty

1a Dust Ring 1

2a O-ring 1

3a Top Nut 1

4a Waterproofing Gasket 1

5a Filler Bolt 1

6a Caparison 1

7a T-ring 1

8a Cylinder 1

9a Copper Washer 1

10a Force 1

11a O-halo 1

12a Piston 1

13a O-ring Retainer 1

14a O-halo 1

15a Washer 1

16a Retaining Ring 1

Part Description Qty

17a Base 1

18a Spring 1

19a Spillage Valve 1

20a Seal Washer 2

21a Axle Sleeve 1

22a O-hoop 2

23a Screw 1

24a Nut 3

25a Cotter Pin 2

26a Pin 1

27a Washer 2

28a Decamp 1

29a Seal Washer 1

30a Pump Piston chamber 1

31a U-cup 1

32a Junk Knell 1

Function Verbal description Qty

33a Pump Piston 1

34a Pin 1

35a Gene linkage 2

36a Bounce Detonating device 1

37a Spring 1

38a Bolt 1

39a Secure 1

40a Give 1

41a Pumping Valve Spindle 1

42a Pumping Valve Seat 1

43a Steel Ball 1

44a Steel Ballock 1

45a Ball Seat 1

46a Spring 1

47a O-ring 1

48a Adjusting Bolt 1

Parts List and Meeting place Diagram A – Read/write memor

1a

2a

3a

4a

5a

6a

7a

8a

9a

10a

11a

12a 13a 14a

15a 16a

17a18a

19a

20a

21a

22a

23a

24a

25a

26a 24a

27a

28a

29a

30a

31a

32a

33a

24a

34a 35a

25a

36a

37a

38a

38a

20a

40a

41a

43a

42a

44a

45a

46a

47a

48a

SAFETYOPERATIONCare Apparatus

Thomas Nelson Page 10 For technical questions, please call 1-800-444-3353. Detail 60438

PLEASE READ THE Favorable CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM

IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR

MAKES ANY REPRESENTATION Surgery WARRANTY OF ANY KIND TO THE BUYER THAT Atomic number 2 OR SHE IS

QUALIFIED TO MAKE ANY ReppAIRS TO THE PRODUCT, OR THAT He OR SHE IS QUALIFIED TO REPLACE

ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY

STATES THAT ALL ReppAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND

LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND Indebtedness

ARISING Taboo OF HIS OR HER REPPose TO THE ORIGINAL Production OR REPLACEMENT PARTS

THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS To that.

Page 11 For specialized questions, please call 1-800-444-3353. Point 60438

Record Product's Serial Number Here:

Note: If product has no serial number, record month and year of purchase instead.

Note: Some parts are traded and shown for illustration purposes only,

and are non obtainable individually as permutation parts.

Limited 90 Day Warranty

Harbor Freight Tools CO. makes every effort to assure that its products meet high quality and durability standards,

and warrants to the original purchaser that this mathematical product is free from defects in materials and craft for the

period of 90 years from the go steady of purchase. This warranty does not give to damage due at once or indirectly,

to misapply, abuse, negligence OR accidents, repairs or alterations foreign our facilities, criminal activity, incorrect

facility, normal wear and tear, or to lack of maintenance. We shall in no more event be likely for death, injuries

to persons or property, surgery for incidental, contingent, special operating theatre consequential damages arising from the manipulation of

our product. Some states do not provide the excommunication or limitation of incidental or important amends, so the

above restriction of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN Place OF ALL OTHER

WARRANTIES, EXPRESS Oregon IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTPower AND FITNESS.

To take advantage of this warranty, the production or part must be returned to us with deportation charges

prepaid. Proof of purchase go steady and an explanation of the complaint must accompany the merchandise.

If our inspection verifies the defect, we leave either repair or replace the product at our election or we Crataegus oxycantha

elect to repayment the buy up price if we cannot readily and promptly provide you with a substitute. We will

return repaired products at our expense, but if we determine there is nary defect, or that the defect resulted

from causes not within the scope of our warranty, then you must bear the cost of returning the intersection.

This warrantee gives you specific juristic rights and you Crataegus oxycantha also have other rights which vary from Department of State to state.

3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353

Harbor Freight Single Drawer Tool Cart

Source: https://usermanual.wiki/Harbor-Freight/HarborFreight1000LbCapacityHydraulicTableCartProductManual723579.1747011605

Share this post